The perfect automatic touchless sanitizer dispenser wall mount 1.2L
Perfect automatic touchless sanitizer dispenser wall mount 1.2L is a premium dispenser without needing to touch any area of the machine. It sprays a fine particle of alcohol that gives the right amount also. CDC recommends using 60% to 95% alcohol-based hand rubs (ABHR) so that the machine is optimized for ABHS viscosity.
Perfect automatic touchless sanitizer dispenser is a robust machine
The machine was developed during the SARS (Severe Acute Respiratory Syndrome) outbreak in Asia, and deployed in thousands of locations, especially public-serving governmental offices, department stores, and businesses. With the full tank, it runs about 2500 to 2800 times of spray, which offers a good amount of running for weeks or a month. The machine has high accuracy sensors for initiating the spray and alerting near-empty alcohol in the tank. The operation LEDs will be turned on when it sprays and the alcohol becomes near to empty.
Wall-mounted, .44(W)*6.49(D)*15.15(H) inches, 6.39 pounds
It is wall-mounted, which offers to save your valuable spaces while people can access the unit conveniently without worrying about fall down of the unit. The dimension and weight are optimized for carrying the right amount of alcohol while serving 2500 to 2800 times of spray.
You can use any 3rd party made rubbing alcohol
You can choose any 3rd party made rubbing alcohol, which offers cost savings. It not only sprays the right amount to serve per person use but also offers cost savings since you can choose any 3rd party made rubbing alcohol as long as you follow the CDC recommendation that is ABHR containing 60% to 95% alcohol.
A typical installation takes less than 5 minutes. You will need two screws provided in the package. Once you screw in following the right distance between the screws (note that the distance guide and installation note comes with the unit), all you have to do is to hang the unit using those two screws.
Fill in the tank with a sample of alcohol
A bottle of rubbing alcohol sample and a plastic funnel is provided in the package. You can open the top cover and gently unscrew the tank cap, then put the plastic funnel in the tank. After that, slowly pour the alcohol into the unit. After completion of the installation and filling the tank, then you can plug the power to operate and ready to use.